Bunano Studios

Collar at Stem Height

A dry collar crosses the near side of a reed below a wet edge
A dry collar crosses the near side of a reed below a wet edge

The original reed climb offered a series of damp fibers narrowing toward the top. A scout could see the largest droplet from the ground. They could not pause on the side of the stem to tell whether its brighter edge covered an actual route. We added a dry collar below the first drop and gave that lower position a role in the climb.

Find the ring from the moss

At ground level the reed appears almost smooth. A piece of fiber near its base projects just enough for the insect to climb. The collar starts at the same point, then curves around three sides of the stem. Teal reflected light picks out the nearer side. We keep the edge a little brighter where it remains dry, leaving the more exposed upper section in muted green.

On the first model the collar completed a full ring. The scout could move around it without caring which side had a nearby drop. We introduced a break along the far half where the fiber has worn away. The traveler can still stop on both sides of the break. They cannot cross directly from one to the other at that level. The route from the ground matters because it gives an available approach to one side of the new gap.

Give the resting spot a view of two nearby surfaces

From the collar, a scout sees the faint side of a raised fiber and part of the lower droplet. One patch of stem is wet. The collar retains a dry rim at the edge of that patch. You can see what changes when the scout looks around the stem without moving another height. The clear rim is a point to which they can return when the reflection in the drop changes.

The first lighting test put a bright rim on every feature next to a drop. The most important fiber became difficult to separate from white reflections. We kept the collar broad enough to receive a longer, quieter patch of light. Its outline remains visible beside the darker stem, from the upper approach as well as below. The droplet stays bright but has less power to describe which part of the reed the scout can use.

Make a short uphill move possible to revise

The first step above the collar takes the scout near the gap where the far edge of one drop becomes visible. If the first view suggested the direction was clear, that movement can test it. Another cue comes from the stem’s slope. The scout can stay on a shallow fiber and choose whether to continue or go back to the collar, where the same lower shape remains available.

During review we start from both sides of the base. A player can reach the same level but see different parts of the next approach. If they become disoriented above the collar, they need a familiar view of its break before considering the other side. We preserve the bank where they began at the bottom of the view without making it the only reference to height.

Record which observation became possible

The Reed Line puts the collar below the climb but above the original ground view. When Two Drops Look Like One describes the view as the scout goes around it. The collar is doing useful work when the player can stop, discover which surface still has a dry edge and consider a small change in height without losing where the climb began. The resting place gives the scout another position for a practical comparison.

The dry edge stays in view while the scout compares the climb above it.